Quick Disconnect Male Fitting 1.250" Steel Weld On

Categories:
Engine
Burn Down Breathers
WESCO

*** IN STOCK SHIPS TODAY *** For the racer that is looking to add quick release pull pin burn down hose fittings to their race car frame or puke tanks RBS has just the answer. With this male quick release portion of the hose the racer can plumb with 1.250" slip on hose to make a simple pull of the pin, slip the hose off and you are ready to do the task that before took several minutes to find a wrench and loosen up the hoses.

Now time to install, slip on install the pin you are done. No more trying to clock anything you have three hundred and sixty degrees to just slip a pin in.

Fitting is for 1.250" slip on hose and has a 1.00" bore thru the center of the fitting. Fitting is made from billet steel that the buyer will have to weld to their attachment point.

Male fitting must be used with #2600-0032J, #2600-0032L, or #2600-0032K female fitting to make a complete unit.

Fittings are sold each. Fitting is 1.630" long, 1.380" diameter at the base, 1.250" where the fitting slips on and 1.020" hole thru the center.